  |
Minnetronix Publications
Considerations for EMC Immunity Testing of Medical Devices
Published online in Medical Design, September 2006
by Lori Lucke, Minnetronix Hardware Manager; Matthew Cunningham,
Minnetronix Senior Hardware Engineer; James Shults, Hospira
Electrical and Systems Engineering Manager
Ask the Expert: Electronics
Published online as a Medical Device Link Web Exclusive for Medical Product Manufacturing News, April 2006
by Rich Nazarian, Minnetronix President and CEO
Medical Device Design Must Adhere to Safety-Critical Criteria
Originally Published in Electronic Design online, January 12, 2006
by Rich Nazarian, Minnetronix President and CEO
Guide To Outsourcing: A Plan for Picking an EMS Partner
Industry experts help you zero in on the right provider of electronics manufacturing services.
Originally Published in MDDI August 2005
Interviewed: Rich Nazarian, President and CEO of Minnetronix
Electronics Outsourcing: When the Connection Is Made
Collaboration, communication with electronics manufacturing service firms pay off for medical OEMs
Originally Published in MPMN April 2005
Interviewed: Rich Nazarian, President and CEO of Minnetronix
Software Innovations Continue to Streamline Manufacturing Processes and Meet New Needs
Originally Published in MPO April 2005
Interviewed: John Bredesen, Minnetronix IT Manager
In Electronics Manufacturing, Less Is Definitely More
Originally Published in MPO January 2005
Emerging technologies, lower costs drive OEMs to outsource more
Interviewed: Rich Nazarian, President and CEO of Minnetronix
Guide to Outsourcing: Myths and Misconceptions in Medtech Outsourcing
Contract manufacturers discuss the most common misconceptions about outsourcing and offer solutions to OEMs.
Originally Published in MDDI July 2004
Interviewed: Dirk Smith, Vice President of Business Development at Minnetronix
On
the Utilization of Automatic Control Systems Within a Perfusion
System
Dr. L.E. Lucke, Minnetronix, Inc., St. Paul, Minnesota, U.S.A
R. Griewski, Terumo Cardiovascular Systems, Ann Arbor, Michigan, U.S.A.
C. Koch, Terumo Cardiovascular Systems, Ann Arbor, Michigan, U.S.A.
Presented at: The World Congress on Medical Physics and Biomedical Engineering; 24-29 August, 2003, Sydney, Australia http://www.wc2003.org
Trend Analysis in Manufacturing for Quality Improvement
by Ashweni Sahni, Minnetronix Director of Quality & Regulatory Affairs, 1996-2002
Presented at: The 45th Annual Minnesota Quality Conference, April 9-10, 1998, Minneapolis Convention Center
Seven Basic Tools That Can Improve Quality
Originally Published in MDDI April 1998
by Ashweni Sahni, Minnetronix Director of Quality & Regulatory Affairs, 1996-2002
A Convolutionally-Coded Adaptive CDMA Receiver Architecture
Dr. Lori Lucke, Minnetronix, Inc., St. Paul, MN 55108
Sabera Kazi, Honeywell Technology Center , Minneapolis, Minnesota 55418
VLSI Architectures for Weighted Order Statistic (WOS) Filters (pdf)
Dr. Lori Lucke, Minnetronix, Inc., St. Paul, MN 55108
Chaitali Chakrabarti, Arizona State University, Tempe, AZ 85287-5706
Viewing Effect Algorithm for Image Expansion (pdf)
Joseph Y. Pai and Lori Lucke, Department of Electrical Engineering, University of Minnesota, Minneapolis, MN 55455
|
 |
